Spoon Mould

Disposable Rice Spoon Plastic Mould：

For the knife mould , fork mould and spoon mould, we must first know the customer's output, and then determine the number of mold cavities according to the output, and then determine the arrangement of our products. We commonly have round and square;

Then consider whether to use a cold runner or a hot runner or a semi-hot runner. The price of the full hot runner is expensive and the waste is less; the price of the semi-hot runner is affordable and the waste is relatively large; the price of the cold runner is low and the waste is large, which should be selected according to which one the customer focuses on;

Next is the choice of steel material. Generally, knives, forks and spoons need to run at high speed. The steel material we choose must ensure that the mold can run at high speed. JMT Mould generally chooses H13, S136, and 2344 steel materials with a hardness of 42-45°. The steel material can ensure the high-speed operation of the mold.

The processing process of the knife, fork and spoon mold is rough milling, semi-finishing, high-speed milling (spoon), parting surface, high-speed fine carving (fork), and finally polishing, and then the mold will be ready for testment.