Industry News

Aluminum die-casting mold production process

Update:16-09-2019
Summary:

With the rapid development of the domestic manufacturin […]

With the rapid development of the domestic manufacturing industry, the die-casting industry has also received many development opportunities, especially aluminum die-casting parts are widely used. So what are the manufacturing processes for aluminum die-casting molds? What are the considerations in these processes? Volume cubic aluminum die-casting mold factory Xiaobian for everyone to explain some, I hope to help you.

Aluminum die-casting mold production process:

1. Aluminum die-casting mold design: divided into product splitting, runner design, slider, thimble, exhaust, slag design, etc.; this requires the mold designer to have full experience and familiarity with the product, so designed Aluminum die-casting molds have good results regardless of service life or die-casting products;

2. Design drawings: the various parts and accessories of aluminum die-casting mold one by one, the first is 3D drawings, followed by 2D drawings, the first design to be reviewed after the drawing, followed by the mold department supervisor and project corresponding engineer, business review To ensure the smooth production and production of aluminum die-casting molds;

3. Aluminum die-casting mold processing: mold processing is divided into mold frame processing, mold core (core) processing, thimble, slider and other accessories processing, in addition to the need to use spark machine, milling machine, grinding machine, CNC, heat treatment, etc. Wait for the mold making equipment to process;

4. Assembly of aluminum die-casting mold: This section requires the previous steps to be completed smoothly. When various parts are in place, it is generally responsible for the fitter responsible for the set of molds. This requires the fitter to be very familiar with the mold and have A certain experience, understand the drawings, assembly technology, understand all kinds of mold making machinery, or can not cope in the case of assembly, the experienced master of the fitter can often face a variety of problems to assemble a set of mold;

5. The real mold of aluminum die-casting mold: When the mold assembly is completed, it is necessary to arrange the corresponding die-casting machine to adjust the timetable of production and real mold, and carry out the T1 test mode of the mold. Here, the head of the die-casting department and the mold for the mold are required. The fitter, the engineer, and the business assist in the completion of the quality inspection after the test product is cooled;

6. Product inspection after test mode: This process requires quality responsible personnel, engineers, and business to complete together. If the product accuracy, appearance, structure, etc. all meet the mold design parameters, it is deemed qualified, and can be sent to the customer for inspection and acceptance; If it does not work, the mold design, the mold department supervisor, the fitter master should open up the research and improvement and the solution until the product is qualified;